卷 27, 编号 1 (2021)
- 年: 2021
- ##submission.datePublished##: 15.04.2021
- 文章: 21
- URL: https://journal.rniito.org/jour/issue/view/49
- DOI: https://doi.org/10.21823/2311-2905-2021-27-1
完整期次
Editorials
Editorial
Clinical studies
Features of Bone Regeneration of the Jaws Alveolar Ridge Using Hydroxyapatite-Based Material
摘要
Background. Currently, using of osteointegrated titanium implants has become a key component for restoring lost function in various areas of clinical medicine. The actual issue remains preservation or reconstruction of bone tissue for optimal use of titanium implants in traumatology and orthopedics, as well as in maxillofacial surgery. One of the most common grafts are hydroxyapatite-based material with various inclusions, for example, an antibiotic.
The aim of the study is to characterize the regeneration of bone tissue of the jaws alveolar ridge using the hydroxyapatite-based material “Collapan-L” in clinical practice.
Material and Methods. The study of the material “Collapan-L” (Intermedapatit, Russia) using involved 30 patients with a diagnosis “chronic periodontitis of the tooth”. Patients underwent complex surgical and orthopedic treatment to restore masticatory function. At the first stage, teeth were removed with the “Collapan-L” material used to preserve the alveolus. 4 months after extraction, dental implantation was performed with simultaneous trephine biopsy from the augmentation zone for histomorphometric analysis. At the stage of implant placement and before prosthetics the stability dynamics was measured.
Results. The study involved 42 tissue samples obtained at periods from 9 to 32 weeks after removal. The morphological assessment of bone tissue from the implantation zone determined that after 4 months trabeculae from the newly formed bone, including small fragments of biomaterial, were revealed; at the same time, there were signs of biodegradation of the implanted material fragments, there was no inflammatory infiltrate. After 6 months in a significant part of cases the granules of bone material were not found, which indicates a pronounced osseointegration of the material. In its structure, the formed bone tissue differences barely noticeable from the native one, which allows us to conclude that by the time of 24 weeks, the processes of reparative osteogenesis in the alveolus are completed.
Conclusion. Histological examination and assessment of changes in the stability showed that using of bone replacement material after tooth extraction can increase the regenerative potential of bone tissue, avoid additional surgical interventions to increase the volume of bone tissue in the area of future implantation, and the formed bone tissue is close in its structure to the native one.
Results of Modified Mini-Open Arthroscopically Assisted Bristow - Latarjet - Bankart Procedure
摘要
The aim of the study — to evaluate clinical outcomes, complications, bone-block healing, positioning and subscapularis muscle insufficiency after modified mini-open arthroscopically assisted Bristow - Latarjet - Bankart procedure.
Materials and Methods. The study included 133 patients who underwent modified mini-open arthroscopically assisted Bristow - Latarjet - Bankart procedure, assessed the functional outcome using the Rowe and Walch-Duplay scales, the range of motion and stability of the joint, and the function of the subscapularis muscle. All patients underwent CT, 82 patients were assessed for MR-signs of subscapularis muscle atrophy.
Results. All patients were satisfied with the treatment results. The mean value on the Rowe scale increased from 35.7 [31,2; 41,0] to 91.3 [82,1; 96,8] (38 to 100 Me 90) (p<0.001) and on the Walch-Duplay scale from 41.5 [34,2; 44,5] to 88.9 [80,4; 97,2] (32 to 100, Me 88) (p<0.001). In 2 (1.5%) patients, shoulder dislocation recurred, in 9 (6.8%) patients, a positive test of premonition of dislocation or periodic feelings of instability were observed. There were no persistent contractures. In 6 (4.5%) cases, the graft was located medially and in 3 (2.3%) cases — laterally. The average α-angle was 14° [5°; 24°] (2° to 39°, Me 15). The proportion of the graft area lost due to resorbtion was 19% [9%; 30%] (from 6 to 58%, Me 20). Nonunion of the graft was observed in 4 (3.0%) patients, 2 (1.5%) of whom had a fracture and bone block migration. A significant (p = 0.021) decrease in the intensity of the MR-signal of the subscapularis muscle was observed, most pronounced in the lower portion. In 9 patients with a positive test of anticipation of dislocation or sensations of instability, the degree of bone block resorption (p = 0.038) and MR-signs of atrophy of the upper and lower portions of the subscapularis muscle were significantly higher (p = 0.031 and p<0.001), and the results of stress testing significantly worse (p<0.001) than in 122 patients without signs of instability.
Conclusion. The results of this study show the efficacy of the modified arthroscopically-assisted Bristow - Latarjet - Bankart procedure in patients with large bone defects, when the soft tissue technique is not a reasonable option.
Frequency of Acetabulum Retroversion Formation after Reorienting Pelvic Osteotomies in Children Over 7 Years Old with Developmental Dysplasia of the Hip
摘要
Background. One of the reasons for the development of the “pincer” type of femoroacetabular impingement are various reorienting pelvic osteotomies, which are widely used in the treatment of children with developmental dysplasia of the hip (DDH).
The aim of the study was to evaluate the frequency of formation of retroversion of the acetabulum after reorienting pubic-iliac, iliac-sciatic and triple pelvic osteotomies in children over 7 years old with DDH I–II degree according to Crowe.
Material and Methods. The retrospective study is based on the results of radiometry of 60 patients (69 hip joints) at an average age of 11.6±2.9 years with DDH I–II degree according to Crowe who underwent surgical treatment in 2014-2016. The patients were divided into three groups of 20 patients each. Group I underwent an iliac osteotomy. Group II underwent an ilio-sciatic osteotomy. In group III patients, the acetabulum was reoriented by triple (pubo-ilio-sciatic) pelvic osteotomy. In addition to standard radiometry of the hip joints, the following indicators were evaluated: signs of acetabular retroversion (“cross-over”, “posterior wall”, “ischial spine”), as well as the index of acetabular retroversion (ARI).
Results. The assessment of the main radiometric parameters of the spatial position and the correction value of the acetabulum was carried out at least 36 months after the surgical treatment. There were no statistically significant differences in the radiometric parameters of the spatial orientation of the acetabulum in group I and II patients (p>0.05), except for the degree of bone coverage, which was significantly higher in group II patients (p<0.05) than in group II patients, which indicated the presence of hypercorrection. In patients of group III, the values of the above-mentioned indicators varied within the physiological values. Retroversion of the acetabulum was observed in more than half of the patients in group I and in almost all patients in group II. In group III patients, acetabular retroversion was observed in only 3 patients.
Conclusion. In the vast majority of cases, a double pelvic osteotomy (pubo-iliac and ilio-sciatic) leads to the formation of hypercorrection of the acetabular fragment and its retroversion in comparison with a triple pelvic osteotomy. The pathological orientation of the acetabulum, despite the achieved stability of the hip joint, can be a morphological substrate for the development of femoro-acetabular impingement and, as a result, coxarthrosis. In the treatment of children with DDH over 7 years old the operation of choice is a triple pelvic osteotomy.
Periacetabular Pelvic Osteotomy in Treatment of Patients with Developmental Dysplasia of the Hip
摘要
Background. Pelvic osteotomies are widely used for treatment of young active patients with developmental dysplasia of the hip (DDH) Type I according to the Crowe or type A according to Hartofilakidis classifications and the absence of severe degenerative cartilage lesions. Nowadays, Ganz periacetabular osteotomy (PAO) is the most common choice of surgeons around the world in treatment of such patients.
The aim of the study was to evaluate the radiological and functional results of Ganz periacetabular osteotomy in patients with DDH.
Material and Methods. A single-center retrospective analysis of 49 Ganz PAO was performed in 43 patients aged 36±9 years. The radiological evaluation criteria were Wiberg (AW), Lequesne (AL), Tonnis (AT) angles, and joint medialization. The results of treatment were evaluated using the Harris scale, iHOT-12, and VAS before treatment and 1 year after, the presence of complications was also monitored.
Results. The average follow-up period was 35±15 months (from 1.0 to 6.9 years). Radiological parameters improved after surgery compared to preoperative ones: AW +19.9° (17.1° vs. 37.0°), AT -11.5° (19.9° vs. 8.4°), AL +14.1° (25.1° vs. 39.2°), joint medialization -5.5 mm (14.3 mm vs. 8.8 mm) (p<0.001). Functional results and quality of life of patients also improved: the Harris scale +35.6 points (47 vs 83 points), iHOT-12 +40.9 points (44 vs 85 points), pain level -2.8 points (5 vs 2 points) (p<0.001). Various complications developed in 20 out of 49 cases (40.8%). Neurological complications were resolved conservatively (22.4%). A direct correlation was evaluated between the surgical treatment of DDH in childhood and the development of neurological complications after PAO (R = 0.76; p<0.001). In 9 cases out of 49 (18.4%), revision surgery was required: in 3 — total hip replacement, in 2 — reorientation of the acetabulum, in 4 — arthroscopic fixation of the anterior articular lip. In 93.9% of cases native hip joint surfaces were preserved.
Conclusion. Ganz PAO has good reconstructive capabilities and sufficient efficiency. The operation allows to restore the coverage of the femoral head with the acetabulum, delays total hip replacement and provides improved functional results.
Improvement of Perioperative Management of Patients Undergoing Surgical Treatment for Hip Periprosthetic Joint Infection
摘要
Two-stage revision arthroplasty in chronic hip periprosthetic joint infection cases is the “gold standard” treatment. First stage debridement leads to large intraoperative and drainage blood loss using standard protocols for thromboprophylaxis and drainage of the surgical wound, which is a significant disadvantage of perioperative management of such patients.
The aim of the study was to determine the effect of modified management protocol with delayed start of thromboprophylaxis and a short period of drainage on the blood loss and the effectiveness of debridement with antibiotic-impregnated spacer placement in patients with hip periprosthetic joint infection.
Materials and Methods. A single-center prospective study was conducted. 90 patients underwent endoprosthesis components removal and antibiotic-impregnated spacer placement. Patients were divided into 3 groups: start of thromboprophylaxis before surgery and 3–4 days of drainage; start of thromboprophylaxis no earlier than 12 hours after surgery and 3–4 days of drainage; start of thromboprophylaxis no earlier than 12 hours after surgery and 1 day of drainage.
Results. There was a statistically significant (p<0.05) decrease of drainage and total blood loss, and transfused blood volume in cases with the delayed start of thromboprophylaxis and a short period of drainage. The proposed protocol was safe for prevention of venous thromboembolic complications and did not affect the frequency of periprosthetic hip joint infection recurrence. The effectiveness of the first stage of treatment — 89%, the second stage — 99% in 1 year after rehabilitation according to the second international consensus on musculoskeletal infection criteria.
Conclusion. The modified protocol of perioperative management is an effective and safe as a blood-saving strategy and can be proposed for widespread use.
Unicompartmental Knee Arthroplasty: Short-Term Results
摘要
Background. Among the methods of surgical treatment of early stages medial knee osteoarthritis in the partial knee replacement (PKR) becomes more and more relevant. The relevance and increasing number of PKR are confirmed by data from various national registers.
The aim of the study was to research the early functional results of PKR and to analyze the complications at various stages of the postoperative period.
Material and Methods. Study design: a single-center prospective study. The results of 90 operations of PKR in the period from March 2018 to April 2020 are presented. Assessment of knee function and quality of life of patients was performed according to three scalesquestionnaires: KOOS, WOMAC, SF-36, which were filled in preoperatively and then at 3, 6, 9, 12, 18 months. after surgery. Patients within the reporting period provided X-rays and filled in the scales at the face-to-face examination and at remote contact.
Results. The most significant improvement of quality of life and median values of the functional results observed after 3 months, and after 18 months. After replacement the best median functional outcome scales KOOS, WOMAC, SF-36 — 79,4 (73,6–84,3); 27,1 (24,8–30,6); 89,1 (85,3–92,6) compared with the functional results obtained before surgery 32,3 (22,8–38,4); 73,6 (63,6–78,8); 35,2 (31,3–42,1); p = 0,027; p = 0.023; p = 0,028, respectively. A negative correlation was obtained between BMI and functional outcome (p = 0.027, R = -0.7).
Conclusion. PKR allowed us to achieve an improvement in the quality of life and functional results already in the early postoperative period (from 3 to 18 months after the operation). The improvement of the operating technique, the analysis of errors and the regularity of the performed PKR will improve the results of PKR and minimize the number of complications.
Comparative Clinical and Pathomorphological Characteristics of Dupuytren’s Contracture in Men and Women
摘要
Background. The data available in the literature on the features of the clinical course and functional prognosis of Dupuytren`s disease in women is contradictory, there are no data on comparative pathomorphological studies of palmar fibromatosis in men and women.
The aim of the study was to identify possible differences in the clinical and pathomorphological characteristics of Dupuytren`s disease in men and women.
Materials and Methods. 228 cases of men and 39 women (6:1) who underwent fasciectomy in 2013–2019 period were analyzed. Histomorphometry of paraffin sections of the patient`s palmar fascia specimens of 24 men and 24 women was performed.
Results. Men ranged in age from 26 to 83, the median age is 3 years more in women (p<0.001), but the median age of Dupuytren`s disease debut is 2 years less in women (p<0.001). The frequency of contractures of the 3rd–4th degree was 35.9% in the group of women and 65% in the group of men (p<0.001). In the group of women the frequency of both hands involvement is 15.2% higher, I–III fingers involvement is 8.7% higher, recurrent contracture is 11.1% higher (p<0.1). Histomorphometric analysis of the patient`s palmar fascia specimens showed that women compared to men had 10.23% less adipose tissue (p<0.001), 7.87% less dense connective tissue (p<0.05), but the proportion of hyperplastic connective tissue was 20.31% higher.
Conclusion. Dupuytren`s disease is less common in women, than men. Women seek surgical treatment earlier than men. The tendency to functional limitations intensification and the risk of recurrence in women is associated with higher expression of hyperplastic changes in the fascial structures of the hand.
Theoretical and experimental studies
Distraction Osteogenesis in the Combined and Sequential Use of Transosseous and Intramedullary Osteosynthesis: Experimental Study
摘要
Background. The methods of “lengthening over the nail” (LON) and the sequential use of the external fixation and nailing in the option “lengthening and then the nail” (LATN) are characterized by ignoring non-observance of the formulated by G.A. Ilizarov is the most important condition for optimizing the osteogenesis process, namely, the preservation of medullary blood supply and osteogenic bone marrow tissue. At the same time, in clinical practice, there was no negative effect of the intramedullary nail on the formation of the regenerate. In experimental studies, the activation of periosteal bone formation during LON is noted. But the active periosteal bone formation detected in clinical practice with a sequential technique has not been confirmed by experimental studies.
The aim of the study was to compare the organotypical rebuilding of the distraction regenerate during tibial lengthening in rabbits according to Ilizarov, over the intramedullary fixator and with the sequential use of the external fixation and nailing.
Materials and Methods. The study was carried out on 54 mature rabbits of the Soviet Chinchilla breed, which were divided into 3 groups of 18 animals. In Gr-1 (control), the tibia was lengthened by 1 cm in a mini-Ilizarov apparatus at a rate of 1 mm per day for 4 sessions step. In Gr-2, the LATN technique was modeled. After the end of lengthening, an intramedullary fixator was implanted installed, the apparatus with the presence of wires only in the base supports was kept as an imitation of blocking the intramedullary fixator. In Gr-3, lengthening was performed over the intramedullary fixator; at the end of lengthening, the wires were left only in the base supports. The fixation period was is 30 days. The total duration of the experiment is 45 days. On the 10th, 15th, 20th, 30th, 45th day X-ray, CT and morphological studies were performed during the experiment.
Results. In the experimental groups, a more pronounced periosteal bone formation in the area of regenerates was noted, while in Gr-3 (LON) cortical plates were formed mainly from the periosteal component, and in Gr-2 (LATN) wide cortical plates were formed from the intermediate and periosteal areas. In this group, the maximum densitometric density values are noted. Endosteal bone formation was preserved in all groups.
Conclusion. The LON and LATN techniques, when compared with the classical Ilizarov lengthening, do not demonstrate any deficiency in the organotypical rebuilding of the bone tissue of the regenerates. All zones of bone formation are present, including endosteal, with intense periosteal bone formation. The most powerful bone structures are formed with the sequential use of the external fixation and nailing (LATN) in the form of the formation of wide cortical plates due to the intermediate and periosteal zones of the regenerate.
Efficiency of 3D Implants with Bioactive Properties for Treatment of Extensive Bone Defects: Experimental Study
摘要
Background. The problem of replacing extensive bone defects remains relevant. The use of implant structures with bioactive properties can stimulate osteogenesis, which will improve the final treatment result.
The aim of the study. In an in vivo experiment, to study the possibility of replacing an extensive defect in the bone diaphysis with a personal bioactive cellular 3D implant and evaluate the long-term results of its use.
Materials and Methods. In an in vivo experiment, adult large mongrel dogs (n = 8) were modeled with an extensive segmental defect of the tibial diaphysis measuring 4 cm. The defect was replaced with a cellular bioactive 3D implant made of titanium alloy Ti6Al4V, manufactured using the additive technology. The diameter of the cells was 1.5 mm on average. The walls of the implant had pores of 100– 300 μm in size. The inner and outer surfaces were coated with a calcium phosphate layer formed by micro-arc oxidation. The primary fixation was provided with the Ilizarov apparatus. In the early postoperative period, antibiotic prophylaxis with broad-spectrum drugs was performed. Clinical, X-ray, histological and statistical methods were used to analyze the results. The main control points were considered: the end of external fixation with the Ilizarov apparatus, after 180 days and 1 year after the termination of external fixation.
Results. During the experiment, the death of animals and complications were not observed. The spatial location of the implant was preserved. The formation of a strong bone-implantation block occurred 37.2±6.3 days after the operation. During this period, the external fixation apparatus was dismantled. Osseointegration was provided under conditions of sufficient primary mechanical stability, due to the cellular structure of the implant, the presence of pores on its walls, and the osteoinductive properties of the applied calcium phosphate coating. The achieved degree of osseointegration persisted in long-term periods (6 months and 1 year after the termination of external fixation). The osteoinductive properties of the calcium phosphate coating were confirmed by the expression of osteopontin cells at all stages of the experiment. Outflow of Ca and P from bone fragments was not observed. An elastic sheath was formed on the surface of the implant, similar in structure to the periosteum. The implant cells were filled with a well-vascularized bone substrate. In the projection of the intermediate zone, compact bone tissue was formed, and in the projection of the medullary canal — reticulofibrous bone marrow. This indicates the possibility of organotypic remodeling of bone structures inside the implant.
Conclusion. The results of the study showed the effectiveness of using a bioactive cellular 3D implant to replace an extensive defect in the shaft of the bone. The architectonics and osteoinductive properties of the implant surface contributed to the formation of complete osseointegration in a short time, while maintaining the achieved result in long-term periods.
In Vitro Evaluation of the Allogeneic Bone Matrix Effect on the Adipose Mesenchymal Stromal Cells Characteristics in Combined Tissue Engineering
摘要
The aim of the study was to evaluate in vitro the effect of native and deproteinized compact and spongy allogenic bone matrices on the characteristics of adipose mesenchymal stromal cells (ASC) in combined tissue engineering.
Material and Methods. 24 samples of native and deproteinized compact and spongy bone were examined, which were exposed to mechanical treatment, modeling, followed by sterilization of the samples by ionizing radiation and bacteriological control of sterilization. Some of the samples underwent deproteinization. The characterized cultures of human ASC were used as test cultures to assess the interaction with the bone samples. The Cytation-5 fluorescent imager and Hoechst 3334 fluorochromes (BD Pharmingen™) and calcein (Calcein AM, BD Pharmingen™) were used to characterize the degree of adhesion, migration, and viability of ASC on bone matrix samples. Matrix cytotoxicity was evaluated by MTT assay on days 1 and 7 of extraction.
Results. The bone matrix samples are characterized by the absence of cytotoxicity (rank 1). ASC demonstrated good adhesion and migration on any surface of the bone matrix and preservation of cell viability during 7 days of observation. Nuclei sizes of the cells adhered to the deproteinized bone matrix of the spongy structure increased by 25–30% compared to other samples. The cells on deproteinized bone matrix had greater size (the size of the cells from nuclei 8.8 to 11.5 μm, the average size of cells nuclei from an 86.3 μm to 129,0 μm, the average perimeter of the cells nuclei from 30.7 μm to 40.7 μm) than in the native bone matrix samples.
Conclusion. The results of the study of various allogeneic bone matrices demonstrate that deep purification of the bone matrix determines the absence of cytotoxicity and the most favorable conditions for the adhesion, migration, proliferation and viability of ASC. Also makes it possible to use tissue engineering based on bone matrices of different structures. Deproteinized spongy bone matrices are best suited for this purpose.
Case Reports
Treatment of Femoral Non-Union with the Gene-Activated Osteoplastic Material: А Case Report
摘要
Background. Non-unions of distal femur fractures are difficult to treat and occur in about 6% of cases. Multifactorial causes of fractures non-unions require individual treatment for each patient in accordance with the “diamond” concept. The standard protocol for patients with atrophic non-unions treatment involves bone autografts using, but there are limitations of size, shape, quality and quantity of autografts. Osteoplastic materials with osteoinductive (angiogenic) and osteoconductive activity can be used as bioresorbable implants in combination with autogenous spongy bone in the treatment of extremities long bones non-unions.
Clinical case description. A 63-year-old patient was admitted to the clinic for non-union of distal third of the femur with bone defect, fragments were fixed with a plate. The examination revealed plate fracture, screws migration (group III according to the Non-Union Scoring System). The volume of supposed bone defect was about 8.5 cm3. The surgery was performed: plate removal, debridement of the non-union zone, femur defect replacement with a bone autograft in combination with the gene-activated osteoplastic material “Histograft” in a ratio of 1:1, osteosynthesis of the femur with two plates. After 6 months. during the control computed tomography, consolidation was determined (4 points on the REBORNE scale). Pain was practically absent (NRS-2). The range of motion in the knee joint: flexion — 80o, extension — 180o. According to the Knee Society Score (KSS) — 68 points.
Conclusion. In this case report the complete fracture fusion was achieved in patient within 6 months — 4 points on the REBORNE scale. No adverse events were observed. It confirms the safety and efficacy of described method and allows to continue the clinical trials.
Copper-Coated Spacer for Total Femoral Replacement in Recurrent Periprosthetic Joint Infection: A Case Report
摘要
Background. There are few cases of entire femur modular replacement with hip and knee joints in patients with periprosthetic joint infection (PJI) in literature. They report encouraging results in patients of elderly and senile age. We present case of a copper-coated femoral spacer implantation to 50-year-old patient with multiple PJI episodes and osteomyelitis of the entire femur.
Clinical presentation. A 40-year-old male patient after resection of the proximal part of the right femur for fibrotic osteodysplasia underwent total hip arthroplasty with replacement of 15 cm of the femur. In December 2010 (20 months after implantation), instability of the femoral component developed, revision arthroplasty was performed with stem recementation. After 4 months, sinus tract formed in the area of the postoperative scar. After another 4 months, the head of the prosthesis was dislocated. In September 2011, the endoprosthesis components were removed and a unipolar cement spacer was implanted. The limb immobilized in a hip spica cast. Methicillin-sensitive S. epidermidis (MSSE) was detected in the preoperative joint aspiration puncture and periprosthetic tissues. After 3 months (December 2011), patient underwent revision total hip arthroplasty (25 cm defect was replaced). 5 years of PJI remission followed. In November 2016 after PJI recurrence the endoprosthesis was removed, and an articulating spacer was implanted. P. aeruginosa was detected in periprosthetic tissues. For the past 2.5 years there were periodically sinus tracts formations. In August of 2019 spacer’s migration resulted in an intercondylar fracture of the right femur. In September 2019, spacer was removed, and MSSE was detected in the surrounding tissues. An articulating cement spacer based on an oncological modular total femur coppercoated endoprosthesis was implanted. At each control examination during the year copper concentration in blood serum was determined, it did not exceed 900–1200 mcg/l. No local or systemic side effects were detected. The patient started working 3 months after surgery. After 6 months poor functioning sinus tract formed in the postoperative scar area in the lower third of the thigh. 1.5 years after the operation, the functional condition is satisfactory.
Conclusion. The use of the copper-coated spacer based on modular total femur endoprosthesis with hip and knee joints in a patient with multiple PJI allowed to improve the function of the limb and reduce the severity of the infectious process. No local or systemic toxic effects of copper were detected.
Review on the Article by A.A. Belokobylov et al. “Copper-Coated Spacer for Total Femoral Replacement in Recurrent Periprosthetic Joint Infection: A Case Report”
Reviews
Stimulation of Distraction Osteogenesis in Limb Lengthening: Our Concept
摘要
Background. Currently, limb lengthening is a widespread operation used in clinical and cosmetic practice. However, in the process of implementing this technology, its main drawbacks were revealed: the duration of treatment and the slowing down of the process of osteogenesis in the elongation zone. Rapid distraction in the external fixator or with an intramedullary rod can lead to a slowdown in osteogenesis and soft tissue complications, including neuropathy and soft tissue eruption.
The aim — to develop a present its own concept of stimulating distraction osteogenesis in limb elongation, based on many years of clinical experience.
Materials and Methods. This study is based on the long-term experience of the Ilizarov Center in limb lengthening (using data from clinical and experimental studies performed in the institution: more than 200 animals and 8000 patients), as well as literature data.
Results. The introduction of the considered methods of stimulation of osteogenesis made it possible to significantly reduce the treatment time of patients and thereby reduce the number of possible complications characteristic of transosseous osteosynthesis. Systemic diseases, congenital malformation of the segment can negatively affect the quality of the new bone.
Conclusions. The use of methods of stimulation of osteogenesis allows to reduce treatment time and increase osteogenesis when limb lengthening, which allows, if necessary, to provide re-lengthening of the segment without increasing treatment time.
Evaluating the Effectiveness of Biophysical Methods of Osteogenesis Stimulation: Review
摘要
Background. Stimulation of osteogenesis (SO) by biophysical methods has been widely used in practice to accelerate healing or stimulate the healing of fractures with non-unions, since the middle of the XIX century. SO can be carried out by direct current electrostimulation, or indirectly by low-intensity pulsed ultrasound, capacitive electrical coupling stimulation, and pulsed electromagnetic field stimulation. SO simulates natural physiological processes: in the case of electrical stimulation, it changes the electromagnetic potential of damaged cell tissues in a manner similar to normal healing processes, or in the case of low-intensity pulsed ultrasound, it produces weak mechanical effects on the fracture area. SO increases the expression of factors and signaling pathways responsible for tissue regeneration and bone mineralization and ultimately accelerates bone union.
The purpose of this review was to present the most up-to-date data from laboratory and clinical studies of the effectiveness of SO.
Material and Methods. The results of laboratory studies and the final results of metaanalyses for each of the four SO methods published from 1959 to 2020 in the PubMed, EMBASE, and eLibrary databases are reviewed.
Conclusion. The use of SO effectively stimulates the healing of fractures with the correct location of the sensors, compliance with the intensity and time of exposure, as well as the timing of use for certain types of fractures. In case of non-union or delayed union of fractures, spondylodesis, arthrodesis, preference should be given to non-invasive methods of SO. Invasive direct current stimulation can be useful for non-union of long bones, spondylodesis with the risk of developing pseudoarthrosis.
Bioactivity Experimental Studies of Composite Materials Promising for Use in Traumatology and Orthopedics: Review
摘要
The aim of the study — to determine the properties of modern bioactive composite materials that have the greatest advantage for use in traumatology and orthopedics, particularly in spine surgery.
Material and Methods. We performed a comprehensive literature search using PubMed, Medline, eLIBRARY and Semantic Scholar. The keywords “implants”, “biomaterials”, “composites”, “tissue engineering”, “scaffolds”, “graphene”, “hydrogels”, “3D bioprinting” were used to identify papers examining the topic of interest. We included comparative studies published from 2010 to 2020 in our review. The following properties were evaluated in papers: biotolerance, bioactivity, osteoconductivity, osteoinductivity, osteostimulation, mechanical strength.
Results. Special attention is paid to the creation of composites. Composites are made by combining two or more materials to achieve biochemical and biomechanical properties. In composites production, a certain place is occupied by the technology of 3D bioprinting, thanks to which it is possible to develop an individual implant according to a given situation.
Conclusion. The combination of composite materials properties indicating on their bioactivity and mechanical strength, as well as the use of 3D techniques to design the geometric forms of implants, provide a high potential for use in traumatology and orthopedics, particularly in spinal surgery.
Usage of External Fixation in the Treatment of Adult Patients with Knee Joint Stiffness: Review
摘要
Relevance. Knee contractures have an impact on quality of life and are also a common cause of disability. The use of external fixation devices has a certain place in the treatment of this pathology.
Purpose. Using the world literature, to identify the modern position, problems, and prospectives of external fixation in the treatment of knee flexion and extension contractures in adult patients.
Methods. EMBASE, Medline, Google Scholar, PubMed, e-LIBRARY, and Cyber resources were used. The analysis included publications relative treatment of knee joint stiffness using external fixation in patients over 18 years old, regardless of gender. At analysis several criterial were used: frame ability to provide movements in the knee joint according with its natural kinematics (biomechanics), stable fixation of the femur and tibia, and possibility inserting wires and halfpins in projection of Reference Positions (RP).
Results. The devices used in the treatment of knee joint contractures in adult patients were conditionally divided, depending on the type of hinge, into 4 groups: non-hinged, uniaxial, reproducing, and virtual. It has been established that only orthopedic hexapods, based on virtual hinge, can meet all of the criteria mentioned above. However the technology of any orthopedic hexapod hardware and software usage for the treatment of contractures of the knee joint, was not developed till now.
Conclusion. The necessity of developing hex-based technology for treatment patients with knee joint contractures was justified by world literature review. Hexapod hardware must provide possibilities of any inclination angle of any ring, and struts fixation not only to base and mobile rings, but to stabilizing as well. Software should be equipped with multi-total residual option. Ortho-SUV Frame (OSF) meets these requirements.